Home » Specialty Cables »
ProTEC
Application
Permanent downhole cable
Signal transmission from downhole tools
Power supply to downhole tools
Distributed downhole monitoring (DTS, DAS)
Continuous downhole control
ProTEC-C
![Cable side view](https://incabspecialty.com/wp-content/uploads/2023/01/protec-c-new-6000x3000-1.png)
Copper conductor
The 1st insulation layer
The 2nd insulation layer
Stainless steel tube
Outer jacket
![Cable cut view](https://incabspecialty.com/wp-content/uploads/2023/01/protec-c.png)
ProTEC-H
![Cable side view](https://incabspecialty.com/wp-content/uploads/2023/01/protec-h-new-6000x3000-1.png)
Optical fiber
Stainless steel tube
Copper conductor
Insulation
Stainless steel tube
Outer jacket (encapsulation)
![Cable cut view](https://incabspecialty.com/wp-content/uploads/2023/01/protec-h_1.png)
ProTEC-H
![Cable side view](https://incabspecialty.com/wp-content/uploads/2023/01/protec-h-new-6000x3000_1.png)
Optical fiber
Stainless steel tube
Copper conductor
Insulation
Filler
Stainless steel tube
Outer jacket (encapsulation)
![Cable cut view](https://incabspecialty.com/wp-content/uploads/2023/01/protec-h_2.png)
ProTEC-S
![Cable side view](https://incabspecialty.com/wp-content/uploads/2023/01/protec-s-new-6000x3000-1.png)
Optical fiber
Stainless steel tube
Insulation
Stainless steel tube
Outer jacket
![Cable cut view](https://incabspecialty.com/wp-content/uploads/2023/01/protec-s.png)
Temperature rating | +90 °C +150 °C +180 °C +200 °C +260 °C |
+194 °F +302 °F +356 °F +392 °F +500 °F |
Minimum installation temperature | −40 °C | −40 °F |
Cable dimensions (square encapsulation) | 11×11 mm | 0.433×0.433 in |
Protecting tube diameter | 6.35 mm | 1/4 in |
Copper conductor section | 0.5–2.5 mm² | 20–13 AWG |
Fiber count | up to 12 | |
Minimum bending radius (no load) | x 20D |